Skip to content
Version 2026.25

Progress Bar ​

A horizontal bar that fills to show where a value sits between a minimum and a maximum.

In Studio ​

In Studio, double-click Progress Bar in the Components category of the Components panel. It is added to the open view, where you can drag it into place.

When to use ​

Use Progress Bar for a level or completion reading with a fixed range — a fill percentage, a batch progress, a deviation from a setpoint (with Fill From set to Center).

Properties ​

PropertyTypeDefaultDescription
ValueString(none)The bound process value driving the fill.
LabelStringLevelThe caption shown above the bar. Ignored entirely when Show Value is false.
MinNumber0The value that anchors an empty bar (or, with Fill From set to Center, the low end of the range shown below the bar).
MaxNumber100The value that anchors a full bar (or the high end of the range shown below the bar).
UnitString%The unit text appended after the numeric readout, e.g. %.
Fill ColorColor#4A6B8AThe fill color. Not an HMI-palette state color — pick any color that reads clearly against the track.
Show Valuetrue, falsetrueFalse renders a bare track-and-fill only, filling the whole component box with no caption, readout, or min/max labels — for overlaying your own markers. True (default) adds the label, numeric readout and min/max captions.
Fill Fromstart, centerstartstart (default) fills from Min toward the value. center anchors the fill at the range midpoint and grows toward the value in either direction — for a deviation bar where the reading is "how far from target, which way."
Track Endsauto, round, squareautoThe end shape of the track and fill: auto (default), round or square. auto is round in a Daylight project and the classic bar, with its small corner radius, otherwise.
Track ColorColor#C4C4C4The empty part of the bar, in the card and the bare bar. It is a property with one built-in default: set it to a color, or to a var(--name) that a style class defines.
Caption ColorColor#666666The caption, the unit and the scale ends.
Value ColorColor#000000The numeric readout.
Quality Markstandard, dimstandardHow a lost link is marked when a value this component shows has Stale or Bad quality. standard (the default) draws the quality outline and glyph over the value. dim keeps the last good value on screen, faded, with nothing drawn over it: it suits a dense panel where one lost link turns a whole column Bad. The value still reads as not live, and a binding that fails to evaluate keeps its outline either way.

Binding ​

Click Bind… on the Value property and bind it to a tag or an expression to drive the live value.

This binding is read-only — the component never writes to the tag.

Animation ​

The fill eases over 0.4s when the value changes, rather than jumping instantly — scan-driven values that arrive in roughly one-second steps would otherwise read as jitter.