Appearance
Gauge
An analog radial dial showing a single process value against a fixed range.
In Studio
In Studio, double-click Gauge in the Components category of the Components panel. It is added to the open view, where you can drag it into place.
When to use
Use Gauge for a single current reading where the position around an arc (rather than a fill bar) is the more familiar instrument metaphor — a pressure, a speed, an RPM.
Properties
| Property | Type | Default | Description |
|---|---|---|---|
| Value | String | (none) | The bound process value the needle arc reflects. |
| Label | String | Gauge | The caption shown below the dial. |
| Min | Number | 0 | The value at the start of the arc (bottom-left). |
| Max | Number | 100 | The value at the end of the arc (bottom-right). |
| Unit | String | (none) | The unit text shown under the numeric readout. |
| Arc Color | Color | #4A6B8A | The color of the filled portion of the arc. Not an HMI-palette state color — pick any color that reads against the (fixed) unfilled-arc track. |
| Quality Mark | standard, dim | standard | How a lost link is marked when a value this component shows has Stale or Bad quality. standard (the default) draws the quality outline and glyph over the value. dim keeps the last good value on screen, faded, with nothing drawn over it: it suits a dense panel where one lost link turns a whole column Bad. The value still reads as not live, and a binding that fails to evaluate keeps its outline either way. |
Binding
Click Bind… on the Value property and bind it to a tag or an expression to drive the live value.
This binding is read-only — the component never writes to the tag.